You are here: JHS Carpets > Carpet Tile Collection > Buffalo Tile
Buffalo Tile specification and colours |
| |
| Click on pictures to view larger image. |
| |
|
|
Buffalo |
|
|
| |
Construction | Diagonal Tile |
| Pile Content |
100% Polypropylene |
| Primary Backing |
Non woven |
| Secondary Backing |
Bitumen |
| Tile size |
50 x 50 12 tiles per box |
| Pile Weight |
2000gm m2 |
| Pile Height |
5.50 mm |
| Total Weight |
5000gm m2 |
| Total Height |
14 mm |
| Flammability |
BS 4790 (Hot metal Nut Test) low radius of ignition |
| Colour Fastness to light |
5 - 6 |
| Resistance to change on wet cleaning |
5 – 6 |
| Colour Fastness to Sea water |
5 – 6 |
| Colour Fastness to rubbing |
5 – 6 |
| |
|
| Installation |
Entrance matting can be either loose laid or
Fully adhered using either tackifier F40 or
Permanent bond F3. Double-sided tape can also be used where appropriate. |
| |
|
| Maintenance |
To extend the life of the entrance carpet as well as the surrounding floor coverings the Barriertex Collection should be regularly vacuumed to remove all loose particle of grit and dust, in extreme cases of soiling Hot Water Extraction can be used all excess water and any residue cleaning chemicals must be removed to avoid soiling. |
| |
| Colour Number |
10820 Anthracite |
|
|
Joseph, Hamilton & Seaton - Leaders in Contract Carpets
