You are here: JHS Carpets > Carpet Tile Collection > Abstract Tile (Wollimex)
Abstract Tile (Wollimex) specification and colours |
| |
| Click on pictures to view larger image. |
| |
|
|
757 Azure |
|
|
| |
| Pile Content |
100% Polypropylene |
| Primary Backing |
Non woven (PES/PA) |
| Secondary Backing |
Glass Reinforced PVC |
| Width |
50 x 50cm |
| Pile Weight |
850gm2 |
| Total Weight |
5000gm2 |
| Pile Height |
4/5mm |
| Total Height |
8mm |
| Gauge |
1/12th |
| Stitch Rate |
10 (40 per 100mm) |
| Stitch Density |
120 |
| Avg Pile Yarn Density |
6000 |
| Weight Density |
154500 |
| Flammability |
BS4790 Low Radius of Ignition |
| Smoke Density |
ASTM E662 Less than 450 |
| Static Propensity |
AATCC-134 under 3.5KV |
| Colour Fastness To Light |
5/5 on Grey Scale |
| Hexapod Test |
ASTM D-5252 (+75% Pile Retention after 4000 cycles |
| Soiling Propensity |
AATCC 123 Grey Scale 5 |
| Dimensional Stability |
Din 54318 < 0.20% |
| |
|
| Installation |
For commercial locations this product must be fully adhered to the subfloor strictly in accordance with British Standards BS 5325 1996. The subfloor must be smooth, clean and dry with an adequate damp proof membrane. We recommend the use of Laybond adhesive or equally approved products. It is essential a check is made to confirm the recommended and approved adhesive prior to fitting. Please check with your local representative or adhesive manufacturer. |
| |
|
| Maintenance |
Vacuum for normal day to day cleaning with suitable industrial cleaner. For commercial cleaning, using dry chemical extraction or the hot water extraction method is recommended when required, depending on local conditions. |
| |
|
| Guarantee |
10 years |
| |
|
| Colour Names and Numbers |
748 Mocha |
| |
756 Thunder |
| |
757 Azure |
| |
776 Silver |
| |
777 StormGrey |
| |
779 MidnightBlue |
| |
794 Sand |
| |
797 Cloud |
| |
|
|
Joseph, Hamilton & Seaton - Leaders in Contract Carpets
