Custom Logo Mats

How to make an entrance……

Bespoke Mats Design

Logo mats enhance any entrance creating a modern and contemporary look, providing you with instant brand awareness. Your logo or brand name is inserted into the mat ensuring it lasts the lifetime of the mat.

Our logo floor mats are made from either Coir or Brush.

Bespoke Mat Design

Coir matting has been used in many entrance areas for decades. Coir logo mats are popular as they not only have the proven ability to scrape but also naturally absorb moisture.

Brush matting creates the best visual impact on mats. The ribbed design allows for the scraping effect to take place as mats are walked on. The major benefit to these commercial entrance logo mats is the colour-fast nature in comparison to coir, it is also arguably harder wearing and as such is more suited to heavy footfall entrance areas such as hotels, schools and offices.

Both of the logo mat products are made using pre-dyed fibres that are cut and inlaid into the mat. Both logo matting products have a 12 month warranty against manufacturing defects. Please note that natural fibres can be subject to fading if placed in direct sunlight.

The main advantage of brush matting is that the design will last for the lifetime of the mat rather than rubbing off in a short period of time with a print.

To order an artwork/design, simply fill out the order form below, attach an image or enter text required. An image will be sent to you for approval - if any amendments need to be made, please ask and we will then re-submit this request to our designers, who will make any changes possible. Please bear in mind that as this is a cut and insert there are limitations - primarily the line width needs to be a minimum of 2cm.

Once you are happy with the design, please e-mail back quoting the artwork reference number along with your purchase order. We will aim to despatch all orders within 7-10 working days. Cancellation of your order is subject to a 100% charge after the mat has been produced.

Specification Brush logo mats Coir logo mats
Construction Rib Needle Punch Tufted
Pile content 100% Polypropylene Coir (Coconut Husk)
Primary Backing Wafelback PVC
Secondary Backing PVC PVC
Pile Weight 1700gm m² 2000gm m²
Total Weight 2770gm m² 5000gm m²
Pile Height 7.5mm 14mm
Total Height 13.5mm 17mm

Care instructions - Regular maintenance is vital to ensure that your Logo Mat remains effective.

Care

How do I care for my brush/coir logo mat? Vacuum the mat regularly to remove debris that has been deposited on the mat. Shedding is normal in the initial month of use. During this period, simply brush or gently shake the mat. To prolong the life of your doormat do not place it in direct sunlight or where it will remain wet for any length of time. Avoid using abrasive chemicals to clean this product as it may stain the synthetic fibres and natural coconut fibres. If the mat becomes wet allow to air/dry naturally.

Order form

Fill out the form below to order an artwork/design.

Orientation *
Rubber Ramp Edging
max upload size: 4MB